A Wall Split Into Two Planes of Light
Most wall profiles do one thing: throw light in a single direction, usually down. The NLP-5015 does something else — it takes one hidden LED strip and mirrors it across a centre seam, sending an equal wash upward and downward at the same time. The wall doesn't just get lit, it gets divided into two luminous planes that meet at a line you never actually see.
The strip itself stays fully concealed inside the 50 × 17 mm aluminium body. Two white PC diffuser covers — one over the upper opening, one over the lower — spread the light evenly and hide every trace of the LEDs. What's left on the wall is pure geometry: a glowing band with depth on both sides, not a single lit edge.
Symmetry From a Single Source
One LED strip, two emission openings, one result: a mirrored wash that treats the wall as two surfaces instead of one. Above the seam and below it, the light behaves identically — same intensity, same softness — so the eye reads the wall as intentionally, architecturally lit rather than merely illuminated.
Finish Options
White Powder Coat
Matte white profile body · white PC diffuser on both openings
Black Powder Coat
Matte black profile body · white PC diffuser on both openings
What the NLP-5015 Delivers
Dual-Plane Wash
One channel, two directions — light spreads above and below the profile at once, from a single mounting line.
Fully Hidden Source
The LED strip never shows. Both PC diffuser covers keep the fixture invisible — only the light itself is on display.
Mirror-Balanced Output
Upper and lower openings distribute light evenly, so neither plane dominates — the wash reads as deliberately symmetrical.
Depth on Flat Walls
Two adjoining light planes add a gradient the eye reads as texture — flat drywall gains visual dimension without any physical relief.
Horizontal or Vertical
Mount it as a horizontal band across a wall, or turn it vertical to stretch the mirrored wash from floor to ceiling.
Strip-Agnostic Channel
Runs warm white, tunable white CCT, or RGBWW strips — the same profile adapts from a quiet glow to full colour control.
No Chasing. No Plastering. Just Mount It.
The NLP-5015 is a surface-fix profile — it goes straight onto a finished wall with screws or clips. Feed the strip into the channel, snap on both diffuser covers, and the install is done. At just 17 mm deep, it sits close and unobtrusive, so the two-plane effect is the only thing that reads on the wall.
Where the Mirrored Wash Works
Bedrooms
Headboard-level band that frames the bed with a soft, symmetrical glow
Hotel Suites
A signature wall detail that lifts perceived room quality without extra fixtures
Living Rooms
Accent line above consoles, media walls, or seating zones
Corridors & Lobbies
A continuous mirrored band that guides movement through long spaces
Restaurants & Bars
Warm dual-plane accents that soften walls and define intimate zones
Boardrooms
A precise architectural line on feature walls behind meeting tables
Retail Walls
Back-wall and display panel lighting that frames product without glare
Feature Columns
Vertical runs on columns and panel joints for a tall, symmetrical light line
Frequently Asked Questions
Specify the NLP-5015 for Your Project
Get pricing, samples, or project-specific guidance on the NLP-5015 wall profile. Our team advises on LED strip selection, driver sizing, and layout for any interior.
