Decide the Light Character at the Fixture, Not at the Switchboard
Every NLMT20 carries its own onboard dip switch — flip it to 3000K, 4000K or 6500K after the fixture is already on the track. No controller box, no app pairing, no rewiring back to a driver panel.
Most Track Spotlights Force the Decision Early. This One Doesn't.
Colour temperature is usually locked in at the order stage — long before anyone has stood in the finished room to judge how the light actually feels. The NLMT20 removes that gamble. A 3-position dip switch sits inside the fixture housing itself, so the installer, designer, or site electrician can set 3000K, 4000K or 6500K at the moment the fixture is clicked onto the magnetic track — or reset it later if the room's use changes.
The fixture body is die-cast aluminium for heat dissipation, mounts to any compatible 22mm magnetic track without tools, and is stocked in Mumbai across multiple wattages and finishes for pan-India dispatch.
Why a Dip Switch Beats a Smart Controller Here
Tunable-white systems need a receiver, a control app, and a stable pairing between fixture and controller — three extra points of failure on a job site. The NLMT20's dip switch is mechanical: flip it, and the setting holds, with nothing to configure, update, or reconnect after a power cut.
What the NLMT20 Gets Right
Built around one idea — the fixture should adapt to the room, not the other way around.
Onboard 3-Way Dip Switch
Set 3000K, 4000K or 6500K directly at the fixture housing. No control box, no app, no signal cable.
Tool-Free Magnetic Mount
Clicks onto compatible 22mm magnetic track in seconds. Reposition or remove fixtures without an electrician.
CRI >90 Colour Rendering
Retail products, artwork and finishes read true — no colour cast to correct for after installation.
7W / 12W / 24W Options
Match output to the space — accent lighting through to double-height commercial ceilings.
Trimless Variant Available
M07TR and M012TR sit flush with the ceiling — only the lens is visible from below.
Die-Cast Aluminium Body
Rated for 25,000+ hours through better heat dissipation than stamped-metal housings.
The Trimless Question, Answered Upfront
Architects often ask whether a track fixture can disappear into the ceiling entirely. The M07TR and M012TR variants are the answer — the housing recesses flush, leaving only the lens visible, while the dip switch and CCT flexibility remain fully intact.
Technical Specifications
NLMT20 Series — standard and trimless variants.
| Specification | Details |
|---|---|
| Model Series | NLMT20 (012F / 012B / 024F / 024B / M07TR / M012TR) |
| Wattage Options | 7W · 12W · 24W |
| Colour Temperature | 3000K / 4000K / 6500K — dip switch selectable at fixture |
| CRI | >90 Ra |
| Beam Angle | 24° standard, 36° wide |
| Input Voltage | 220–240V AC, 50Hz |
| Mounting | Magnetic — 22mm recessed track compatible |
| Finish Options | Matt black, white, trimless (flush ceiling) |
| Body Material | Die-cast aluminium |
| IP Rating | IP20 — indoor use |
| Dimming | Triac / DALI compatible on select variants |
| Lifespan | 25,000+ hours |
| Warranty | 1 year |
Where the NLMT20 Gets Specified
Any space where the final colour temperature isn't fully settled until the design is standing in front of it.
Living & family rooms
Warm accent lighting that can shift cooler if the room is repurposed later.
Kitchen islands
Neutral white for true food colour and task visibility at the counter.
Retail & apparel stores
High-CRI output keeps fabric colours and displays looking accurate.
Jewellery showrooms
Cool daylight setting sharpens sparkle and metal finish under glass.
Boutique hotel rooms
Trimless variant keeps the ceiling clean while still offering CCT choice.
Art galleries
Accurate rendering for pigment and canvas work without a colour cast.
Office & co-working spaces
Neutral to cool settings support focus through the working day.
Clinics & diagnostic centres
Cool daylight for corridors and consultation rooms needing clarity.
Frequently Asked Questions
Specify the NLMT20 for Your Next Project
Share your track layout, wattage requirement and finish preference — our team responds with the right fixture combination.
