Ahmedabad
08048039668
+918591141102

NLP-HG6 Curved Cove LED Profile | Soft Wall-to-Ceiling Wash | Nucleo India { “@context“...

NLP-HG6 Curved Cove LED Profile | Soft Wall-to-Ceiling Wash | Nucleo India

Let the Architecture Curve Into Light

Where a wall meets a ceiling, most cove profiles still sit inside a sharp 90-degree angle — the light source changes direction, but the geometry it sits in doesn't. The NLP-HG6 changes that geometry. Its body is genuinely curved, 60mm x 36.3mm, radiused to physically bridge the wall and ceiling planes rather than tuck into the corner they form. Light doesn't exit at a single angle; it spreads gradually across the arc, so the junction reads as a soft transition rather than a fitting bolted into a corner.

That curve is backed by weight. At 674g/m, the NLP-HG6 is a heavy-gauge extrusion built to hold its radius accurately over long, continuous runs — a curved profile that flexes or twists even slightly will show it, far more visibly than a straight channel would. It ships complete with a matching diffuser, 10 pieces of profile and 10 of diffuser per pack, in black, white or gold — the last one meant to be seen as a finished architectural line, not hidden.

〰️

The Curve Is the Feature, Not a Detail

A flat cove channel throws light in a fairly directional band, often leaving one visible bright edge where the beam meets the wall or ceiling. Because the NLP-HG6's body is genuinely curved rather than angled, light exits across a continuously changing surface, spreading the brightness gradient instead of concentrating it at one line. That only holds up, though, if the curve itself stays true along the run — which is why the profile is built at 674g/m with a 60mm x 36.3mm radiused body: heavy enough to keep its shape across long lengths without sagging or twisting before it's fixed in place.

Key Features

〰️

Genuinely Curved Cove Body

A radiused 60mm x 36.3mm profile that bridges the wall-ceiling junction directly, instead of sitting inside a sharp corner.

📐

Wide 9.6mm Diffusion Channel

An internal channel sized to spread light evenly across the full arc, avoiding a single hot edge along the curve.

💡

Diffuser Included

Supplied as a matched pair, 10 profile plus 10 diffuser per pack, shaped to follow the curve for one continuous glow.

⚖️

674g/m Heavy Extrusion

A dense aluminium body that holds its radius accurately across long, continuous cove runs without twisting.

🎨

Black, White or Gold

Three finish options — black and white to recede into the surface, gold to stand out as a visible design line.

Cuts and Joins On Site

Lengths are trimmed to fit and connected with straight and corner joiners for continuous perimeter coves.

📦

Profile and Diffuser, One Pack — Gold Included

The NLP-HG6 never arrives as a bare curved channel needing a separately matched diffuser — every pack has 10 pieces of profile and 10 pieces of diffuser, shaped to sit flush along the arc. Where it goes further than most cove profiles is finish: alongside black and white, a gold option is available for projects where the exposed curve is meant to read as a deliberate metal detail — a hotel reception cove, a feature wall junction — rather than something to conceal.


Where the Curve Goes

Most common

Wall-to-Ceiling Cove

Bridging the room's perimeter junction with a soft radiused glow instead of a sharp corner.

Feature detail

Reception & Lobby Curves

An exposed gold or white curve used as a visible architectural line above a feature wall.

Continuous run

Perimeter Cove Lighting

Joined lengths carrying the curve continuously around a room's ceiling edge.

Soft ambience

Bulkhead & Step Transitions

A rounded profile softening the visual break at a ceiling bulkhead or level change.


Applications

🏠

Residential Living Rooms

Soft curved coves along ceiling perimeters instead of a hard shadow line

🏨

Hotel Lobbies

Gold-finish curved coves used as a visible architectural detail at reception

🏢

Corporate Offices

Meeting room and boardroom ceiling coves with a soft, glare-free glow

🛍️

Retail & Showrooms

Curved feature-wall junctions that draw the eye without a visible fitting

🍽️

Restaurants & Bars

Ambient curved cove lighting along booths and perimeter walls

💆

Spas & Wellness

Gentle graduated wash along curved cove lines for a calm, shadow-free glow

🪜

Staircases & Landings

Curved soffit and landing coves that soften transitions between levels

🏛️

Museums & Galleries

Even, shadow-free wall-ceiling wash where the fitting itself must stay unseen


Frequently Asked Questions

A standard corner cove profile sits inside a sharp angle where two flat planes meet, so the light source still reads as a fitting tucked into a corner. The NLP-HG6 has a curved, radiused body — 60mm x 36.3mm — designed to physically bridge the wall and ceiling with a smooth transition rather than a hard line. Light exits across that curve gradually, so the eye sees a graduated glow rather than a single bright edge, and the join between wall and ceiling stops looking like a join at all.
A curved profile has to hold its radius accurately along the full run, or the arc reads as uneven and the light gradient breaks up. At 674g/m, the NLP-HG6 is a heavy-gauge extrusion that stays true to its curve across long lengths without flexing or twisting during installation, which matters more for a curved section than it does for a straight channel where minor deviation is less visible.
It ships as a matched pair — 10 pieces of profile and 10 pieces of diffuser in every pack, so there's no separate diffuser to source or match to the curve. The diffuser is what spreads individual LED points into one continuous graduated wash across the approximately 9.6mm channel, which is what gives the cove its soft, shadow-free appearance rather than a row of visible dots.
The NLP-HG6 is available in black, white or gold. Black and white behave as they do on most profiles — black recedes into darker cove details, white blends into standard painted surfaces. Gold is chosen less for concealment and more as a visible design detail: on premium interiors — hotel lobbies, feature reception walls, high-end residential coves — the exposed curve of the profile itself is meant to be seen as a finished metal edge, not hidden, and gold reads as an intentional architectural line even when the LEDs are off.
The curved body is fixed to the framing at the wall-ceiling junction so its radius bridges both planes, typically installed at first-fix stage alongside gypboard or false ceiling framing. The LED strip is run through the internal channel and the diffuser is fitted last, once plastering, painting and any dust-generating work is complete, so the finished curve and diffuser face stay clean through the build.
Yes. Lengths are cut and joined on site to match room dimensions, and corner and straight joiners are used to carry the curve continuously around a perimeter cove or into an adjoining wall. Because the profile is heavier and holds its radius well, joins across long runs stay aligned without the curve visibly stepping or twisting at the joint.
A flat cove channel throws light in a fairly directional band, often leaving a visible bright line where the beam meets the surface. Because the NLP-HG6's body is curved rather than flat, light exits across a continuously changing angle along the arc, which spreads the brightness gradient instead of concentrating it at one edge. The practical result is a softer transition from bright to dark across the wall-ceiling junction, with no single hard line to draw the eye to the fitting itself.

Supplying pan-India · Mumbai · Delhi · Bangalore · Hyderabad · Chennai · Pune · Ahmedabad · Kolkata · Jaipur · Surat · Lucknow · Chandigarh · Kochi · Nagpur · Indore · Coimbatore · Bhopal

 2026-09-04T12:42:51

Keywords