Oby Deep Recessed SMD LED Downlight: low-glare light from a deep-set source
A deep recessed SMD downlight that tucks the light source up into the ceiling, so rooms get comfortable illumination without the glare of a bare light point.
Why depth changes how a room feels
Look straight up in a room with shallow downlights and the light source is the first thing you see. A deeper recess moves the source out of sight, so you notice the light on surfaces, not the lamp itself. The Oby Deep Recessed SMD LED Downlight is built around that idea, pairing a set-back SMD source with a clean round trim.
Design intent
Choose it where occupants look up often, such as bedrooms, treatment rooms and reception seating.
Before you finalise the ceiling plan
A deep body needs clear space above the false ceiling. Share your section drawings with Nucleo and we will confirm the fit.
Why specifiers choose it
Deep-set source
The SMD source sits well back inside the housing, so it is hidden from most viewing angles and the ceiling looks calm.
Reduced glare
A deeper reflector wall shields the eye from the light source, which matters in bedrooms, lounges and workspaces.
Controlled light spill
The recess shapes the light downward, limiting stray brightness on the ceiling plane around the fitting.
Diffused SMD output
SMD sources give a smooth, even wash rather than a sharp hotspot.
Flush ceiling finish
Mounts into a false ceiling so the trim reads as a clean, simple circle.
Comfortable for long stays
Visual comfort matters where people sit or lie down for hours, such as offices, clinics and hotel rooms.
Pairs with accent lighting
Use as the ambient layer, then add spotlights and wall washers for emphasis.
Backed by Nucleo support
Confirm cutout, body depth, driver and dimming with the Nucleo team before ordering.
Where it works best
Living rooms
Ambient base lighting with accent layers added separately.
Bedrooms
Soft, diffused light that stays comfortable when lying down.
Corridors & passages
Evenly spaced downlights give clear, continuous guidance.
Kitchens
General light over counters and walkways.
Bathrooms & dressing areas
Clean ceiling light for grooming spaces; confirm suitability for damp zones.
Offices & cabins
Uniform light across desks and meeting tables.
Retail & showrooms
Ambient fill beneath focused display lighting.
Hotel rooms & lobbies
Quiet ceiling detail that keeps focus on the interiors.
Clinics & reception
Calm, even illumination for waiting and consultation areas.
Staircases & landings
Discreet overhead light for safe movement.
Planning a layout
Keep it regular
Align downlights to the room's geometry: furniture, beds and walkways. A regular grid looks deliberate, and an irregular one looks accidental.
Layer, don't overload
Fewer, well-placed downlights plus separate accent lighting beat a ceiling full of identical fittings.
Frequently asked questions
The set-back SMD source is shielded by the housing, which reduces glare compared with a shallow fitting.
It is intended mainly for general ambient lighting. For accent or wall-grazing effects, pair it with focused spotlights.
Spacing depends on ceiling height and desired brightness. As a starting point, space fittings roughly the ceiling height apart, then refine with a layout from Nucleo.
Cutout and body depth depend on the size you choose. Confirm both with Nucleo before finalising false-ceiling drawings.
Dimming depends on the driver supplied. Tell us your control system and we will advise the matching driver.
Warm tones suit living and sleeping areas, while neutral tones suit kitchens, offices and work zones. Keep one tone consistent within a room.
It suits homes, offices, hotels, clinics and retail interiors with a false ceiling. For wet areas, confirm the suitable rating first.
Yes, Nucleo supplies pan-India. Call or WhatsApp us with your project details.
Planning low-glare ceilings?
Send us your layout and we will help you choose the right size, finish and driver.
