3W Surface COB Light IP65: weather-ready light, no cutout
The ALP305R mounts straight onto the surface and carries IP65 protection, so a small, clean point of light can go where recessed fittings and open wiring cannot.
When recessing is not an option
Concrete slabs, finished walls and exposed balconies leave no room for a cutout. A surface-mounted light solves that by sitting on the architecture.
The ALP305R is a 3W COB fitting that fixes directly to the ceiling, soffit or wall. Its IP65 rating means dust and water jets are not a worry in covered outdoor spaces, while the single COB source gives one clean, continuous point of light instead of a scatter of dots.
Small output, deliberate use
At 3W this is an accent and guide light, not a floodlight. Use it to mark entrances, stairs and edges, and let larger fittings handle general illumination.
Protection that depends on installation
IP65 is a rating of the fitting. Keep it intact by sealing the cable entry, using a weatherproof junction and fixing the body firmly to a flat surface.
What the ALP305R gives a project
Practical advantages of a compact, sealed, surface-mounted COB light.
Surface mount
Fixes directly to the ceiling or wall. No cutout, no void, no false-ceiling work.
IP65 protection
Dust-tight and protected against water jets for covered outdoor and damp locations.
COB light source
A single COB source gives a clean, continuous point of light without the multi-dot look of SMD arrays.
3W low-output accent
Right-sized for guide lighting, entrances and accent points, with little glare.
Retrofit friendly
Suits slab ceilings, finished walls and renovation jobs where recessing is not possible.
Compact presence
A small body that sits neatly on architecture instead of competing with it.
Weather-ready detailing
Sealed construction suits balconies, porches and shaded facades.
Easy to specify
One compact fitting for repeated use along corridors, stairs and boundaries.
Where it works best
Covered, damp and hard-to-recess locations where a small sealed light does the job.
Balconies and verandas
Low-glare point light under a covered edge.
Entrances and porches
Mark the door and keep it welcoming at night.
Staircases and landings
Guide light on walls and risers.
Corridors
Repeating points of light along a surface.
Car-park entrances
Reliable light in covered, damp bays.
Shop fronts
Accent over signage and shutters.
Washrooms and utility areas
IP65 protection for damp rooms.
Facade accents
Small points of light on shaded walls.
Questions, answered
Common planning and ordering questions for the ALP305R.
