Give a Flat Wall a Light Gradient
Most wall lights add a point of brightness. The NLP-5015 adds a gradient. Fixed at any height, it releases light above and below its own centre line, so the wall fades from a bright band into soft shadow in both directions. Paint, texture and material all pick up the effect, and the wall appears to gain depth without any change to its surface.
The fitting stays quiet. The LED strip sits inside the aluminium body, two white PC diffusers close the openings, and the 17 mm depth keeps the profile close to the wall. Designers use it where a room needs atmosphere but there is no ceiling to recess into, in finished apartments, hotel refurbishments and shop fit-outs.
Split Emission From a Single Channel
One strip channel feeds two angled openings. Half of the output travels up the wall, the other half travels down, so a single run of strip does the work of two separate fittings and keeps the wiring simple.
Finish Options
White Powder Coat
Blends into light walls so only the glow reads. White PC diffusers.
Black Powder Coat
A crisp graphic line on pale walls, or invisible on dark feature walls. White PC diffusers.
What You Get From It
Symmetrical Wash
Light spreads evenly above and below the profile, giving a balanced glow rather than a hot spot.
Glare-Free View
The strip is recessed behind PC diffusers, so people see light on the wall, not individual LED dots.
Slim 17 mm Depth
Sits close to the wall and clears most skirting, headboard and furniture lines.
No Wall Cutting
Screw or clip it to the surface. No chasing, plastering or false ceiling work is needed.
Any Orientation
Run it horizontally, vertically or as a framed rectangle on a feature panel.
Strip Freedom
Fits warm white, tunable white and RGBWW strips, so the same profile suits static and scene-based rooms.
Two Finishes
White or black powder coat to match or contrast with the wall.
Aluminium Body
Rigid extrusion that stays straight along the run and carries heat away from the strip.
Installed Straight Onto Finished Walls
Fix the body, lay the strip, clip on both diffusers. Because nothing is recessed, the profile can be added after paint, after furniture and even after handover, which makes it useful for upgrades where opening up walls is not an option.
Where Designers Use It
Bedroom Headboards
A glowing band behind the bed that defines the sleeping zone.
Hotel Guest Rooms
Repeatable feature-wall lighting that lifts perceived room quality.
Living Room Walls
Accent lines above sofas, consoles and media units.
Corridors
Continuous wall lines that guide movement through hotels and offices.
Restaurants and Cafés
Warm wall bands that create intimate seating zones.
Reception Areas
A clean architectural line behind the desk or along a waiting wall.
Retail Walls
Back-wall and shelf-zone lighting for boutiques and showrooms.
Columns and Niches
Vertical runs that frame a panel, pillar or alcove.
Lift Lobbies
Soft lines on lobby walls where ceiling space is limited.
Installation and Specification Questions
Planning a Wall Lighting Layout?
Talk to Nucleo about the NLP-5015, strip selection and driver placement for your project.
