Built for Spaces Standard Strips Can't Reach
Cabinet interiors, wardrobe aluminium channels, furniture edge grooves, and display shelf lips all share one thing in common: they're too narrow for a standard LED strip or neon flex. At just 4mm wide and 10mm deep, this neon flex was designed specifically for those spaces. It slides into slots that nothing else fits, and produces a smooth, seamless glow — no hot spots, no gaps, no visible LED dots.
With 120 LEDs packed into every metre of silicone body, the light output is dense enough to look like a continuous source. And because every single LED is a cut point, you can trim the flex to within 8mm of your exact required length — far more precise than the 25–50mm cut pitch of conventional neon flex.
Cross-section · silicone body
4 mm wide · 10 mm deep
Cut at Every Single LED — 8.3 mm Precision
At 120 LEDs per metre, each LED sits just 8.3 mm from the next. Every gap between adjacent LEDs is a valid cut point. This means you can customise the length of this neon flex far more precisely than any standard product — essential when fitting inside furniture where every millimetre counts.
Colour Temperature Options
Warm White
3000 K
Flattering, incandescent-like warmth — ideal for wardrobes, bedrooms, and display shelving where a cosy glow is preferred
Neutral White
4000 K
Clean, balanced white — suits kitchens, utility cabinets, and display cases where accurate colour rendering matters
Cool White
6000 K
Crisp, modern white — preferred in contemporary minimalist interiors, commercial shelving, and utility storage areas
24V — Longer Runs, Cooler Operation Inside Furniture
Running at 24V instead of 12V means consistent brightness across runs up to 5 metres without voltage drop causing dimming at the far end. It also runs cooler — important in the enclosed environment of a wardrobe or cabinet where heat has nowhere to escape. Safe, stable, and suitable for continuous low-voltage operation.
Why This Neon Flex
Fits 4mm Slots
At just 4mm wide, it slides into narrow aluminium furniture channels, cabinet edge grooves, and wardrobe slots that standard products cannot enter.
No Hot Spots
120 LEDs per metre means the light source is so dense that individual LED dots are invisible — only a smooth, unbroken line of light is visible.
Per-LED Cuttable
Cut every 8.3mm rather than every 25–50mm. Fit precisely inside any cabinet dimension without leftover flex or awkward gaps.
Silicone Body
The silicone outer body is flexible, durable, and resistant to dust, humidity, and the closed environments typical of furniture interiors.
Sensor & Switch Compatible
Works directly with 24V door-activated switches, PIR motion sensors, and push-button systems for automatic wardrobe lighting.
Dimmable
Compatible with 24V PWM dimmers for adjustable brightness — from full intensity to a soft night-mode glow inside wardrobes and display cabinets.
Where It Fits
Wardrobes
Interior edges, hanging rails, shelf lips — warm glow for clothing and accessories
Cabinets
Kitchen cabinets, living room units, display cabinets — clean edge lighting
Shelving
Under-shelf edges in libraries, retail, and home shelving units
Mirror Frames
Slim channel behind bathroom and dressing mirror edges for a halo glow
Retail Display
Product display shelves and showcase edges — highlight merchandise evenly
Kitchen Under-Shelf
Under wall-unit edges for task lighting without visible strip or gaps
False Ceiling Slots
Slim ceiling reveals and shadow gap channels too narrow for standard neon flex
TV & Media Units
Behind media unit panels, TV recesses, and entertainment console edges
Frequently Asked Questions
Order the 4mm Slim Neon Flex for Your Project
Get pricing, samples, or advice on colour temperature, driver sizing, and sensor wiring for your cabinet and wardrobe lighting installation.
